Skip to content

Commercial weighing · Published September 29, 2026 · 5 min read

Selling by weight in Alaska? What the state expects of your scale

A loaded semi on a wet Alaska highway in fall

If weight determines a commercial transaction, the device and installation must meet the applicable requirements. That covers the deli scale, the truck scale at the pit, the floor scale where freight is billed by the pound, and any scale that works out a charge for a service by weight (AS 45.75.080).

We can help identify equipment and service needs; Alaska Weights and Measures handles state registration and inspection requirements. Those are separate steps with separate owners, so this article takes them one at a time.

Four separate things

  • Equipment approval. A commercial device needs a National Type Evaluation Program (NTEP) certificate of conformance before it goes into use in the state (17 AAC 90.740). The owner has to show it when the state asks (17 AAC 90.770).
  • Setup and calibration. Private work that gets the device set up and tested for its location. It does not replace state registration or inspection.
  • Device registration. Done with the state, by the device owner (17 AAC 90.925).
  • State inspection. The state inspects and tests commercial devices at least annually, and more often when it considers it necessary (AS 45.75.080).

The rulebook the state tests against

Alaska applies NIST Handbook 44 to weighing devices under 17 AAC 90.049, and adopts its scales section by reference under AS 45.75.050(d), with Alaska's own amendments. A newer NIST edition does not automatically override what Alaska has adopted and modified. NTEP approval is a separate requirement from Handbook 44 tolerances.

Registration and the June 30 renewal

Device registration expires June 30. Renewal application and payment are due July 1, or the next working day when July 1 is not a working day. After July 15, a renewal is past due under 17 AAC 90.935.

A first registration is past due if the state has not received it on or before the day the device is first placed in service (17 AAC 90.935).

Repair notices

If the state finds a device inaccurate or in need of repair, it can tag it with a Repair Notice. The owner has to repair it right away unless the director gives written permission to defer, and a device kept in service without that permission is rejected (17 AAC 90.090).

Putting new equipment into commercial use

  1. Select an appropriate approved device and configuration for how it will be used. We can quote this.
  2. Contact the state about registration. This is the device owner's step.
  3. Arrange setup and calibration at the installed location. We can quote this.
  4. Keep the relevant records, including the NTEP certificate and your service reports.
  5. Follow inspection or repair notices from the state. We can quote the repair work.

Buying a listed model does not on its own make an installation compliant. If you're not sure whether your scale counts as commercial, ask us or contact Alaska Weights and Measures through the program page below.

This is a plain-language summary, not legal advice. The statute, the regulations and Alaska Weights and Measures have the final word.

Need a scale checked before it goes into service?

Tell us the equipment, where it is, and how it is used.