Skip to content

Calibration and certification

Scale calibration in Alaska, with a clear report

We test your scale against reference weights, adjust it when results call for it and you agree, and document the work. On site for most equipment.

A 1,000 lb test weight on a floor scale

How a visit goes

Test, adjust if needed, test again, document.

  1. Test

    Reference weights go on across the range before anything is touched. These as-found results document how the scale performed at the time of testing.

  2. Adjust, when needed and agreed

    If results fall outside the agreed limits, the scale can be adjusted. Not every calibration needs an adjustment.

  3. Test again

    After any adjustment, the same tests are repeated and recorded.

  4. Document

    Your report records the tests, the tolerance basis and the results. Repair, replacement parts and additional scope are quoted separately as applicable.

As-found results document performance at the time of testing. If results fall outside the agreed limits, your quality process may require a review of earlier measurements.

The report

What your calibration report records.

Your report identifies the equipment, records the tests performed and the applicable tolerance basis, and documents the results. Where adjustment is needed and performed, it records the adjustment and the relevant before-and-after results. Reference standards are identified as applicable to the work.

Tell us if your quality system requires a particular certificate format.

A next-service date on the report is a planned interval, not a legal deadline.

A truck scale in winter

Acceptance criteria

Commercial weighing and process requirements

The acceptance criteria that apply depend on how the scale is used. A scale used in commercial transactions is held to NIST Handbook 44 as adopted in Alaska under 17 AAC 90.049. Calibration does not replace state registration or inspection. See Alaska weighing requirements.

A process or quality scale answers to your own specification or auditor. For accredited certificates on laboratory balances, see ISO/IEC 17025 accredited calibration.

Plan the next calibration.

Tell us your equipment, location, and required service date. We will help plan the next calibration.